FD-1150 is a 15inch LF + 1.7inch HF 250W RMS full range active systems, the power of the amp module is with 300W output at 8Ohm. The slop distortion is controlled in 1%, and the damping factor is larger than 400, with EQ control for HF & LF, parallel and unparallel input, also with limit, direct current, short-cut, temperature protection. MIC / LINE input switch function, with International standard power input and output. FD-1150 is suitable for conference rooms, monitoring, Bars, small parties and moving DJ. The enclosure is coated with durable rubber paint blue or black. It is a very good system for your sound projects

Technical Data:
 1. 1x15inch LF driver with 2.55inch voice coil, and 170mm magnet with 250W RMS.
2. HF driver is with 1x1.7inch Beryllium diaphragm, with 1inch throat exit 50W RMS.
3. Horn dispersion is with 90 x 40 degree.
4. 18mm quality birch plywood, coated with durable paint, blue or black.
5. Can be flied by flying accessories, and the horn dispersion can be adjust after installation.
6. It would be achieving better sound if working with the SE-A Sub systems.
7. Please read carefully on the operation manual before using the systems.
8. The impedance of the speaker is 8Ohm.
9. Output power is with 300W at 8Ohm.
10. MIC / LINE input sensitive MIC ≤50mv/LINE≤1mv
11. Damping factor ≥400
12. Signal noise 95dB
13. Frequency response: 20Hz to 22Khz ≤±0.5db
14. AC input power: 220V ± 5%

Technical summary:
Frequency range: 65Hz ~ 20KHz
Required crossover points: 2KHz
SPL: 95dB cont, 107dB peak
Dispersion: 90°H × 40 °V
Dimensions H/W/D: 700×452.6×400mm
Net Weight: 39kg