Homepage > Business Opportunity·Agency > Security & Protection >> Antitheft, Alarm Devices & Systems >> Telephone Alarm Devices >>
 
  IP66 weatherproof phone More >> 
Time of Issue: Jun 7, 2011 14:41:46
Period OF Validity: Jun 6, 2012 14:41:45
Source of Information:
Location:
Click Rate:
· Details ·

                   IP66 weatherproof phone

*Designed to work on Railway, metro, tunnel, etc. 

*Housed in robust aluminium die case with spring loaded door, it will offer 

 protection against the outdoor environment, vandals resistance and rot 

 resistance.

*European/UK standards for EMC and US FCC, telephony, waterproofing IP66

*Lightening protection together with offering the level of performance and reliability demanded in such an environment.

* Remote testing programmable optional

* DTMF(Dual Tone Multi Frequency)

* Matching with most PABX, PBX and PAX systems.

 

Main features:

1. Cabinet: aluminum alloy diecasting,high antiviolent, able to glisten, 

   convenient for looking for.

2. Without keypad, auto-dial phone. 

3. Door cover: orient automatically and good self-closing,convenient for use.

4.Handset: made of special engineering plastic,high antiknock resistance,high

   tensile strength resistance and high anti-violent.

5.All of the components including handset telephone receiver and transmitter,

 buzzer,circuit board and cabinet are designed to be multilayer waterproof and 

 dustproof which is up to Class III grade. The whole machine is up to national 

 standard GB4208-93 IP 66.

6. Phone is provided with high stability,high antijamming capability,and it is up 

   to national standard GB/T 15279- 94.

 

SPECIFICATION:

1. Applicable for various types of SPC exchange and dispatching exchange 

   system with feeding voltage of 48-60V.

2. Ambient temperature:-30'C~75'C.Relative humidity:10%~95% 

    Atmospheric pressure: 86~106Kpa Circumstance noise:≤ 60dB(A)

3. Sound level of ringing: ≥70dB(A).

4. Standard frequency: low frequency group: 697,770, 852, 941Hz,

   high frequency group: 1209,1336,1477Hz, frequency deviation: ≤±1.5%

  If service line is a 3Km signallevel:Standard frequency: low frequency group: 

  -9dB±3dB,high frequency group:7dB±3dB,level difference between low and 

  high frequency of compound signal:2±1dB,the total distortion caused by i

  ntermodulation of harmonic wave is lower than the basic level by at least 

  20dB.

5. Call transmission index: (5KM),SLR≤12,RLR≤1,STMR≥10, utput impedance 

    is 600Ω.

6.  Telephone line powered. No external power or battery back up required.

7.  Lightening protection to ITU-T recommendation K.21


8.  Handset: made of special engineering plastic, high antiknock resistance, 

     Weatherproof, armoured cable optional,    

9.  Handset integrity wiring to enable the telephone system to check if the

     telephone unit is still operational.


10.  Selectable 7 minute time out, to release the line if the handset is left off 

       hook optional.

11.  Easy installation/ replacement

 

Certification:

EMC:

EN55022:2006 emissions

EN55024:1998 + A1:2001 immunity

Transients/Lightning

ITU-T recommendations K.21 (07/2003)

Ingress Protection:

GB4208-93 

IP66

FCC

 

Packing detail:

1pcs in each inner CTN box, size: 43.3 x 27.6 x 19.1   G.W: 6.6kg

4pcs in outer CTN box, size: 56.6 x 44.5 x42  G.W: 17kg

20GP: 1000PCS

40GP: 2000PCS

40HQ: 2200PCS



· Pictures ·
· Related Comments ·
Read all comments

 Disclaimer:This member assumes full responsibility for the content of this listing. Sugoo.com accepts no responsibility whatsoever in respect of such content.
 
About us | Service Agreement | Join us | Advertise | Featured Services | Feedback and Advice | Help | Contact us

    ICP:05025759    Copyright © 2004-2011 Sugoo.com Inc. All rights reserved.